+44 (0) 118 941 1387

World Leaders in Load Cells and Unique Weighing Assemblies for Silo, Vessel and Process Weighing

Weighing Assemblies for Hazardous Areas

Equipment and products operating in hazardous areas are required to meet stringent criteria. They must be 'protected' to avoid the possibility that they could become a source of ignition. Weighing systems are often an integral part of a process within the hazardous area and therefore must have suitable protection.

Untitled-1Thames Side Sensors, as a manufacturer and supplier of weighing equipment, complies with the ATEX equipment directive 2014/34/EU. We are a market leader in the design and manufacture of load cells for weighing in hazardous areas, having developed a range of load cells specifically designed for such demanding applications, for example chemical weighing.

Models T95, MasterMount and VC3500 have dual ATEX and IECEx certification to Ex ia IIC T6 Ga, Ex ia IIIC T70°C Da, allowing them to be used by OEMs and system integrators to supply systems with load cells having dual certification. 

We also offer a standard range of ATEX approved weight indicators/controllers.

Weighing Assemblies with Hazardous Area Approval:

LA66 Anti-Vibration Assembly

LA66 Anti-Vibration Assembly (5kg - 300kg)

  • For vibrating or mixer/agitator applications
  • 5kg to 300kg
  • OIML C3 or C6
  • IP68/IP69K
  • ATEX
LeverMount-Lite-Weighing-Assembly-cta

LeverMount® Lite (10kg - 200kg)

  • For general weighing applications
  • Stainless steel load cell with Grade 316 mounting accessory
  • 10kg to 200kg
  • OIML C3 or C6
  • IP68/IP69K, ATEX
LA66-Tension-Assembly-cta

LA66 Tension (5kg - 300kg)

  • For tension applications with the T66 load cell
  • 5kg to 300kg
  • OIML C3 or C6
  • IP68/IP69K
  • ATEX
Thames-Side-LA85-Weighing-Assembly-cta

LA85 Anti-Vibration Assembly (300kg - 10,000kg)

  • For vibrating or mixer/agitator applications
  • 300kg to 10,000kg
  • OIML C3
  • IP68/IP69K
  • ATEX
Weighing Assemblies

LeverMount® (300kg - 5,000kg)

  • For general weighing applications
  • Stainless steel load cell with Grade 316 mounting accessory
  • 300kg to 5,000kg
  • OIML C3
  • IP68/IP69K with 350i load cell
  • ATEX
T95 weighing assembly

T95 'Pendulum' Assembly (2,000kg - 10,000kg)

  • For mixer/agitator, weigh-in-motion (WIM) and axle weighing applications
  • Stainless steel load cell with painted or stainless steel 'pendulum' mounting accessory
  • OIML C3 approved load cell
  • IP68/IP69K
  • ATEX
  • IECEx
T20 Weighing Assembly

T20 (1,000kg - 30,000kg)

  • For silo/tank/vessel weighing or gravimetric level measurement
  • Stainless steel load cell; zinc plated or stainless steel mounting accessory
  • Low cost solution
  • 1,000kg to 30,000kg capacity range
  • IP68/IP69K
  • ATEX
MasterMount Weighing Assembly

MasterMount® (2,000kg - 30,000kg)

  • For silo/tank/vessel weighing applications - UNIQUE design
  • Stainless steel load cell; painted alloy steel mounting accessory
  • IP68/IP69K
  • ATEX
  • IECEx
VC3500

VC3500 (2,000kg - 200,000kg)

  • Benchmark solution in silo/tank/vessel weighing
  • Stainless steel load cell
  • Zinc plated steel mounting accessory (options of galvanised steel, special paint or stainless steel)
  • IP68 and IP69K
  • ATEX and IECEx approval
  • EN1090 approval with CE marking is available as an option (on request)
T34-Silo-Mount-Weighing-Assembly-1-cta

T34 Silo Mount Assembly (10,000kg - 1,000,000kg)

  • Stainless steel compression rocker column load cell
  • OIML C4 approval up to 60,000kg
  • IP68/IP69K
  • ATEX

Further information

Contact Thames Side now to discuss your requirements for weighing assemblies for use in hazardous areas. We have significant experience and applications knowledge and we can provide expert guidance on the optimum solution for you.

map

Powered by Intergage