An intelligent load cell amplifier, the XT100 is an international industry standard rack mounted (19”) instrument providing a choice of input and output options. Each instrument combines a controller and conditioner into one unit, and can be supplied either with an integral display (4.5 digit LCD) or with a hand held remote programmer (also LCD).
The rack accommodates up to 8 display amplifiers or 12 blind amplifiers, so with a standard input rate of 100ms, one pass auto calibration and auto zero, the units are a perfect cost and space effective partner for multiple vessel weighing applications.
Key features
- Rack mounted (19”)
- Optional 4.5 digit LCD backlit lid integrated display
- Standard analogue outputs (0-10Vdc & 4-20mA)
- High accuracy, low drift
- 3 year manufacturers warranty
- Designed and manufactured in the UK
Technical Specification
- Variable gain load cell sensitivity from 0.5 to 200mV/V
- Fully programmable via keypad & COMMS port
- Auto calibration
- 4.5 digit high resolution integral display (± 19999) or hand held display
- High noise immunity
- Excitation compensation for supply line losses
- 10V@150mA excitation capability per amplifier
- Peak hold
- Isolated input & output
- Auto zero (Tare)
- 10 year data retention (EEPROM)
Input
- AC power supply (110VAC/240VAC)
- Standard input rate 100mS
Output
- Volt free set point relays (2 off) with programmable in flight compensation and hysteresis
- Communications & printer drive options - 20mA current loop, MODBUS, ASCII, Mantrabus, via RS232/485
Options & Accessories
- Visualink SCADA graphical application software
- IF25 multi drop interface (up to 25 units into a single RS232 port)
- Blanking covers for unused rack slots
- Junction Box (JB4T) to sum multiple load cells
