XT3000 Indicator / Transmitter

The XT3000 is a stackable, space-saving, high speed digital weight indicator / transmitter with a DIN rail / Omega rail mounting configuration. With a speed of 2400 measurements/second and several connectivity options, it is the ideal solution for a very wide range of weighing applications, both static and dynamic.

Standard connections: 3 digital opto-isolated inputs, 4 digital opto-isolated outputs (all with status LEDs), serial RS232, serial RS485, MODBUS (RTU or ASCII).

Optional connections in addition to the above: Analogue outputs (e.g. 4-20mA) or PROFINET I/O or EtherNet/IP^TM.

Designed for process weighing systems, as well as any machinery with a weighing function, it incorporates the latest digital electronics.  The working state is easily viewed using the 6-digit bright red LED display (7mm height) and status LEDs for tare, prefixed tare, zero and steady weight.

Ask us a question about this advanced weight indicator / transmitter.

Calibration can be achieved by using live weights, or with only the load cell capacity and sensitivity data in mV/V - allowing for fast start-up without live weights. A Windows PC software program makes calibration and setup simple and fast.

For a panel mount version with the same specification, see the XT2000 indicator / transmitter.

For a non-stackable DIN rail mounted version with the same specification, see the XT1000 indicator / transmitter

Typical applications:

• Industrial weighing scales
• Weighing and level measurement of tanks and silos
• Transmission of weight to a PLC
• Filling and dosing machines
• Checkweighers
• Animal weighing
• High speed sorting scales
• Multihead weighers
• Crane / lifting equipment overload control

Key features:

• High resolution: 24-bit A/D converter with 16,000,000 internal divisions
• 6 digit, 7mm bright red LED display (range -99999 to 999999)
• 2400 weight measurements per second from the load cell(s)
• Status LEDs for weighing functions, digital inputs and digital outputs
• Several XT3000 units can be connected in the same bus network
• Software or integral buttons for configuration and calibration
• Selectable digital filters
• 4 digital outputs
• Integral check-weighing application (in all versions)
• 10-28 V DC power supply
• Powers up to 8 x 350Ω or 16 x 700Ω load cells
• Four versions are available:
  • XT3000-SO: serial connections RS232 and RS485 (MODBUS RTU and ASCII)
  • XT3000-SO-AN: serial connections (as above) and analogue outputs (0-5V, 0-10V, 0-20mA, 4-20mA with galvanic isolation)
  • XT3000-SO-PN: serial connections (as above) and PROFINET I/O
  • XT3000-SO-ETHERNET-IP: serial connections (as above) and EtherNet/IP^TM

Optional accessories:

• XT-MOUNTING-BOX:
  • Surface mount, IP66 polycarbonate enclosure with integral Omega/DIN rail and pre-assembled earth terminal, for mounting of XT3000 or XT1000 transmitter and optional power supply (see XT-PS). Fitted with 4 x PG7 and 2 x PG9 cable glands. Impact resistance IK07. Transparent cover.
• XT-PS:
  • Power supply, DIN rail / Omega rail mounted. 100-240V AC, 50/60Hz, to 24V DC output

Make an enquiry about this class leading product.

Product conformity:

• 2014/30/EU (EMC Electromagnetic Compatibility)
  • EN 61000-6-3:2007/A1:2011
  • EN 55022 Class B
  • EN 45501:2015 (NAWI)

Please fill in the information below to access the downloads.

We take great care with your personal data:

• It will not be sold to third parties
• It will be stored and processed on secure servers with SSL encryption
• For more information please refer to our Privacy Policy

Are you seeing this form every time you visit our site?  You can prevent this by not deleting the site cookies each time you close your browser program or each time you finish visiting our site. Your browser program may be automatically set to do this when you install it or run an update.